One of the most critical pieces of survival gear to have is rope, which you should have in your Bug Out Bag for wilderness survival.

But what if you lose your rope or run out? That is where knowing how to make rope from plants comes in.

*I want to point out that rope making is something that humans have known for a really long time. Prehistoric people started making ropes at least 1.8 million years ago! How do we know this? Because archaeologists have found imprints of rope in rocks and clay. (Source)

If our ancient ancestors could figure out how to make rope from plants, there is no reason we can’t do it today. The only skill that modern men are lacking is patience!

Step 1: Find Your Plant Fibers

First off, let’s start with what is fiber. If you understand this, you can make rope out of plants even if you can’t identify the plant in question.

Plants are mostly made of two components:

  • Starches: These are the nutrient parts of a plant. They will dissolve in water.
  • Fiber: These are the parts of a plant that give it structure. Insoluble fibers will not dissolve in water.

All plants consist of fiber. However, to make a strong cord, you want to choose plants that have the strongest fibers.

Some of the top plants for making cordage include:

  • Stinging nettle
  • Yucca
  • Milkweed
  • Dogbane
  • Western red cedar

An advanced survivalist might take the time to memorize the best plants for making cordage in the wild. But what will you do if you can’t find these plants?

I think memorizing which parts of a plant have the strongest fibers is a lot more realistic.

Yukka plant
The yucca plant is great for making rope

Best Parts of Plants for Making Rope

  • Bark Fibers: You do NOT want to make twine out of bark. You want the fibers from the INNER bark of a tree! They are also very long fibers, so are easier to use for making rope than shorter fibers.
  • Stalk Fibers: These fibers are also robust and long. While they don’t have the strength or length of bark fibers, stalk fibers are easier to access and use.
  • Grass Fibers: These fibers are pretty short and not very strong. However, it is straightforward to process grass fibers, so they are a good choice if you need to make rope quickly and strength isn’t a significant issue.

Plant parts like leaves also contain fiber. However, leaf fibers generally are very weak except for a few species.

To put this in perspective, think celery fibers vs. spinach fibers. Celery is a stalk, whereas spinach is a leaf. Which would you rather make rope out of?

* I learned a lot about fibers during a papermaking course I took. It is amazing how many survival skills you can learn if you keep your mind open!

Step 2: Separating the Fibers from the Plants

To make rope, you need to separate the fiber from the plant. Otherwise, you’ll end up with a lot of starches in your rope. Those starches will weaken the rope. The moment it rains on your rope, you can count on it to dissolve!

There are a few ways to separate the fibers from plants to make rope:

Method 1: Boil Fresh Plants

If it is springtime and you only have fresh plants available, you’ll need to boil them. When you cook the plants, the starches will dissolve into the water. You dump out this water and wash the boiled plants. You’ve got to wash them thoroughly to get rid of any starches that might be remaining. What you end up with is pure fiber.

Some people half-ass this step and just soak the plants in water. This works okay if the plant is fibrous (think woody stalks or inner bark). However, you’ll still end up with a lot of starch remaining, and your rope won’t be as strong.

Method 2: Find Dead or Dry Plants

This is great if you use grass or stalks as your rope-making fiber. Once the plant has died and dried up, the starches will have dried out, too.

If you are using stalks for your fiber, choose plants that have tough, wood-like outers. Lay the dry stalks out on a flat surface. Using a rock, pound the stalks so they split lengthwise. Do not try to cut the stalks open, as this will cut the fibers.

Now, you can use a knife or sharp rock to scrape out the softer fibers from within. Discard the outer bark and use the inner fibers.

Note: Some people find it helpful to soak stalks to make it easier to separate the fibers from the outer bark. This is fine. However, NEVER USE WET FIBER TO MAKE ROPE. It will shorten when it dries, thus causing your rope to unravel and weaken.

making rope from jute
This image shows a man soaking jute to soften it. He then cracks open the tough outer bark to remove the fibers inside. Jute is one of the most common natural rope materials.

Method 3: Drying the Plants Yourself

If you aren’t restricted by time, then you can hang the plants to air dry. Much of the starch will dry out of them, leaving behind mostly fiber. Just as if you were using dead plants, you’ll need to pound open stalks and scrape out the fibers.

Method 4: Stripping the Inner Bark of a Tree

The inner bark of trees doesn’t contain much starch at all. The inner bark also has the strongest and longest of plant fibers. So, this is the best way to get your plant fibers for making rope in the wild.

Some trees – especially red cedar –  have long, stringy fibers. You remove a long section of the bark (you’ll want a survival knife to do this) and then peel off long fiber strips.

If the fibers are tough and can’t be broken into thin strips, you can soak them in water and then strip them.

Important: When I say “inner bark,” I am talking about the part known as the bast or phloem of the tree. In a true survival situation, you can strip away as much of the phloem as you need. If you are just testing your skills, look for trees with dead bark.   Or, if the tree is living, only take a few thin strips from it. Taking too much phloem can kill the tree.

Inner tree diagram
#4 is the phloem and the part of the bark you want to use for making rope.
Red Cedar tree
Check out how stringy the inner bark from red cedar is. Just pull it off in long strips!

Step 3: Buffing the Fibers

Depending on the type and part of the plant used, you might be able to make rope immediately from the fibers you sourced. However, you’ll probably need to do something called buffing first.

Buffing is a step that softens the fibers so they are more flexible. It also helps to remove any remaining woody bark.

Just roll the fibers back and forth in your hands to buff them. Or, I prefer to put the fiber strands on my thigh and rub my hand back and forth over them.

You should see the fibers becoming fluffier and stringier.

*Just because the fibers are becoming thinner, it doesn’t mean they are getting weaker! You want the fibers to be very thin and fluffy. The thinner and fluffier the fibers are, the better you can twist them together. The twisting is what gives the rope strength!

making rope
Instead of using her hands to buff the dry, fibrous grass, this woman is pounding it with a rock. Buffing makes the fibers more flexible, so they twist together into rope more easily.

4. Wrapping Your Fiber into Rope

Now, it is time to wrap your plant fibers into rope! There are a few ways to do this, and none of them can be explained well in text. So, here’s a video that will show you how to wrap natural fibers into rope.

This is a great survival skill to know and could save your life. You might even start trading the rope you made for supplies. But keeping some strong rope in your Bug Out Bag is still a good idea. 

If you aren’t sure what rope is best, here’s the Survivalist’s Guide to Rope.

Have you ever tried making rope from plants? How did it go? Let us know in the comments.

Source link

Previous article9/11 Memorial – As It Happened – 0937
Next article9/11 Memorial – As It Happened – 1028


Please enter your comment!
Please enter your name here